PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys
HomeHome > Products > Programmable Logic Controller > PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys
PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys

Technical Specifications Support Codesys v3.5 SP13 The corresponding relation of input signal A/D is as follows: Figure
Basic Info.
Model NO. SC1403
Condition New
Customized Customized
Material ABS
Warranty 1 year
Transport Package carton
Specification 72mm(L) X 80mm(W) X 63mm(H)
Trademark Chitic
Origin China
HS Code 853710
Production Capacity 50000 pieces/year
Product Description

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys



Technical Specifications
Support Codesys v3.5 SP13
Communication parametersModule consumption
Number of communication ports1 (Can communicate with 6 MODBUS TCP master station at the same time)Extension Bus power supply (5VDC)120mA
Extension Bus power supply (24VDC)20mA
Type of interface
Ethernet (RJ45)
Communicate protocalMODBUS TCP slave station
Port : 502
Dimensions and Mounting
Configure the contentIP address;
Subnet mask;
Gateway IP;
MAC address;
Dimensions72mm(L) X 80mm(W) X 63mm(H)
Weight160g
Way to install35mm DIN rail
Panel mounting type
Work Environment
Communication rate10/100MbpsOperating temperature0 ~ +55ºC
I/O areaInput 100KB
Output 100KB
Storage temperature-40 ~ +70ºC
Relative humnidity5% ~ 95% Noncondensing
Maximum number of sites per networkAccording to configuration software

The corresponding relation of input signal A/D is as follows:

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys


Figure 1

Description of MODBUS TCP
Function codeFunction (Master station)
01Read switch output status
02Read switch intput status
03Read analog output status
04Read analog input status
05Forces the output value of a switch
06Forces the output value of analog
15Forces the output value of multiple switches to be set
16Forces the value of multiple analog outputs to be set

Input channel connection mode
The SC1403 software configuration is shown in Figure 1, where IP_Address, Subnet_Mask, and Gateway_Address are used to set the IP address, subnet mask, and gateway, respectively. See Figure 2 for the Settings, which are in the form of Numbers and decimal points. MAC_address is used to set the MAC address, as shown in Figure 1, in the form of letters, Numbers and "-". SC1403 has a default read and write length of 200 bytes, and a port number of 502.
Figure 2
MODBUS TCP address Mapping table ( Start address %IW2 and %QW2)
DATA AREATYPEADDRESS RANGEMODBUS ADDRESSMAPPING FORMULAMODBUSDATA TYPE
Zone I%IXBOOL%IX2.0~%IX201.7 0~1599 IXm.n: (m- first address) *8+n0x
%IWWORD%IW2~%IW2000~99 IWm:(m - first address)/24x
Zone Q%QXBOOL%QX2.0~%QX201.7 0~1599 QXm.n:(m - first address) *8+n 1x
%QWWORD %QW2~%QW2000~99 QWm:(m - first address)/23x

About CHINT
Founded in 1984, the Chint Group provides safe, reliable and stable industrial electrical equipment and solutions for energy efficient management systems. With 30 years of development it has grown to be Asia' s largest low*voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia. With three R&D centers located in Europe, North America and China, there are also branches in over 20 countries and more than 30.000 employees in the world. CHINT provides reliable products, system solutions and services to more than 100 countries worldwide.

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys


3 Global Research Centers: Europe, North America, Asia Pacific
6 International Marketing & Sales Area: Asia Pacific, Middle East and Africa, Europe, Latin America, North America, China
9 Manufacturing Bases: China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan), Thailand, Egypt, Germany
22 Logistics Centers 14 International Subsidiaries 17 Marketing Offices in China 2300 Sales Companies
About Chitic
Chrtic Control Engineering Co.. Ltd. is a subsidiary company of Chint, and a leading provider of automation & control technologies and applications in China that helps the industry customers to improve operating safety, reliability and efficiency. Chitic has series of products including PCS1800 DCS, TDCS9200 DCS and CTS700 DCS, information platform for water company, control system for high speed rapier loom, drive system of switched reluctance motor, solar energy monitoring system, computing cloud center for new energy; etc. Chitic control system won 2006 National Science and Technology Progress Awards of China, CTS700 DCS won the award of 2010 Innovative Product of China. Chitic headquarter is located at the beautiful city of Hangzhou, two hours drive from Shanghai. Chitic has its own science & technology park, Chitic Park, which covers about six thousand square meters.
Our Business Sector

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys


Typical Reference

PCS1200 PLC Ethernet Communication Module programmable logic controller Support Codesys