W713b IP54 Intelligent Pump Constant Pressure Controller
About Bedford Guangzhou Bedford Electric Equipment Co., Ltd. has focused on automatic water pump controllers and solar p
Basic Info.
Model NO. | W713B |
Link of Transformation | AC-DC-AC Variable-Frequency Drive |
Nature of DC Power | Voltage Variable-Frequency Drive |
Function | Pump Special |
Brand | Bedford |
Input Voltage | 1pH 220V or 3pH 380V |
Color | Black |
Protection Rate | IP54 |
Output Voltage | 0~220/380V Three Phase |
Output Power | 0.75~18.5kw |
Transport Package | Wooden Cases or as Customes′ Requirements |
Specification | Depend on model |
Trademark | BEDFORD |
Origin | Guangzhou |
HS Code | 9032899090 |
Production Capacity | 5000 Pieces /Month |
Product Description
About Bedford
Guangzhou Bedford Electric Equipment Co., Ltd. has focused on automatic water pump controllers and solar pump inverters since 2003. We aim to provide users with innovative inverter solutions for stable water supply systems worldwide. It is essential to source quality automatic water pump controllers from a reliable water pump manufacturer to improve the automation level of water supply systems and reduce equipment maintenance and labor costs. The W713B series pump-mounted controller has been recognized and appreciated by our customers since its launch.
Waterproof New Style Constant Pressure Variable Speed Water Pump Controller -IP54
is suitable for full-automatic operation, with characteristics of high quality, multi-functional, low noise and strong commonality etc.There are no special demands for peripherals, it mainly use normal components, for example: Water detection use transducer, transmitter (include water level transmitter, temperature transmitter, etc. ) or inductive remote transmission pressure gauge, with output of 4~20mA, 0~5VDC and 0~10 VDC standard signal.
Features:
Category | Content | W713B | |
Photo for Reference | |||
Pressure Optimization | Pressure Stability | The pressure change curve is more stable, and the frequency change is smaller after stabilization | |
Alternate Transition | Yes, the transition tends to be smooth and excessive (the transitional pump looks at the difference between the given pressure L and the feedback pressure P to adjust the frequency, and it will stop when L-P<0.2bar. If the water consumption suddenly increases at this time, the L-P>0.2 bar, alternating water pumps will speed up the frequency regulation pressure, when L-P=0.2bar, slowly adjust the frequency for a smooth transition) | ||
Mode | Control Mode | Constant pressure, Constant differential pressur,Constant temperature, Constant differential temperature | |
Linkage Mode | Synchronize, Master-slave, Big-small pump, One duty one standby, One VFD drive two pumps | ||
Manual/ auto Mode Switching | Can be switched by button or terminal. Button switch: press the and buttons at the same time for manual/auto switch (also switchable in case of failure) Terminal switching: S2-COM off: auto control S2-COM on:manual control In manual control, the manual frequency can be adjusted through the up and down buttons, and the influence of pressure is shielded, which is more comprehensive | ||
Alternating Mode |
| ||
Upper and Lower Pool Control | Available (S1~S4 terminal control) | ||
Independent Start and Stop Control | Available, start and stop is controlled by the inverter (can be controlled by panel or S4 terminal) | ||
Outward Expansion | General Frequency Converter (such as PLC) | Compatible with this mode | |
Connect the Touch Screen of BEDFORD | Available | ||
Third-party Devices | Direct connection (Mob Bus RTU communication protocol) | ||
External Interface Features | Analog Input | ||
Digital Input | 4-way 1. Electronic contact gauge control 2. Manual/auto control 3. Terminal run/stop 4. Water level control (low water level) 5. Upper and lower pool control 6. One driving two fault input | ||
Digital Output |
1: Forward running (including zero-speed running); 2: Upper limit frequency reaching; 3: Stop status; 4: Lower limit frequency reaching; 5: The frequency is not equal to zero; 6: Actual pressure on the outlet side reaching high water pressure alarm value; 7: Actual pressure on the outlet side decreases to low water pressure alarm value; 8: Actual temperature on the outlet side reaching high water temperature alarm value; 9: Actual temperature on the outlet side decreases to low water temperature alarm value; 10: One driving two RO function, for variable frequency pump control 11: One driving two RO function, for power frequency pump control | ||
Button | Keyboard Touch | Touch the button: feel better | |
Other Features | Multi-linkage | Max realize up to 5 pumps linkage water supply operation | |
Sleep Function | Unmanned water automatic sleep, better energy saving effect | ||
Freeze-proofing Function | Suitable for low temperature frost climate | ||
Anti-clogging Function | Prevent and remove pipe blockage | ||
Power On Restart | Automatic continuous water supply, power interruption during operation, and automatic restart when there is a call | ||
Master Fault Shift Automatically | Realize unmanned monitoring, host failure, uninterrupted water supply | ||
Day-Part Function | 1. 3 independent day-part control, up to 7 day-part achieved when define separated; 2. One Duty One Standby Day-part Function: 3 independent day-part time section contro. | ||
Multiple Water Supply Failure Alarm Functions | High water pressure, low water pressure, low water level, open sensor and other fault alarms | ||
Multiple Fault Protection Functions | Overcurrent, overvoltage, under voltage, phase loss, overload and other protection functions |
Send to us